Can I Change the Type of Dial Tone I Have With 8x8

Unable to Dial Out Due to Decorated Signals in Cisco SPA Phones

1. Last updated

2. Salvage as PDF

Loading...

If y'all are using the Cisco SPA IP telephone, the screen may display a "Line ane Invalid Number" error message or give a decorated signal. Larn how to resolve here.

Symptom

Lifting the handset (or initializing the speakerphone) on your Cisco telephone immediately gives a busy signal instead of a dial tone, and you are unable to punch out.

On the 525G2 model, the screen may also brandish the following error:Line 1 Invalid Number.

Applies To

Cisco IP phones

Resolution

Set the Interdigit Short Timer in the Phone Web GUI

Annotation : The following procedure requires you to access the telephone's web interface (GUI) from a computer on the same network as the phone itself.

1. Obtain the phone'due south IP address:
   • Cisco SPA 303 & 504: PressMenu > 9 Network.
   • Cisco SPA 525G2: PressMenu > 10 Condition > two Network Status.
2. Open up a spider web browser and browse to the telephone's IP address.
3. Log in with username admin and the phone password.
4. Click Advanced to bring upwardly all bachelor options.
5. Click theRegional tab.
6. Roll down to theControl Timer Values (sec) section.
7. Update the Interdigit Short Timer with a higher value. This will determine how many seconds you have to dial before the phone gives a busy signal.
8. Scroll down and clickSubmit All Changes. The telephone may reboot.
9. After the phone has rebooted and come online, elevator the receiver (or press the speakerphone button) to test if your timer settings have taken effect.

Crusade

The phone'sInterdigit Short Timer needs to be set to an appropriate amount of fourth dimension. This timer controls when the phone gives the "off the hook" warning, which sounds virtually identical to a busy betoken (simply faster). If the time set is as well short, you lot will non have a take chances to dial before the telephone thinks it is off the hook.

washingtonjamet1970.blogspot.com

Source: https://support.8x8.com/equipment-devices/phones/cisco/cisco-spa-ip-phones-cannot-dial-out-due-to-immediate-busy-signal

Share this post